Hanse 348 is a yacht produced by the German shipyard Hanse since 2018. The body is made of lightweight composite fiberglass. The use of this material made it possible to reduce the weight of the case without significant loss of strength characteristics. The vessel has seaworthiness class A - it is intended for going out to the open sea.
The upper deck is covered with natural teak and is equipped with a self-drying system. On the sides of the boat there are chrome rails. In the aft part of the yacht there is a folding swimming platform with an injury-safe covering. On the cockpit of the boat there is a helm post with two steering wheels, sofas with lockers for storing personal belongings and rescue equipment, and a folding teak table between them. The aft lower deck houses two guest cabins, equipped with double beds and walk-in closets. At the request of the customer, the cabin on the port side can be converted into a storeroom at the shipyard. On the port side of Hanse 348 there is a bathroom, on the right side there is a galley with a stove, a sink and a storage compartment for dishes. In the middle of the boat there is a salon with a corner sofa on the starboard side, and a straight one on the left. There is a teak table mounted on the starboard side. The master cabin is located in the bow of the hull and is equipped with a double bed, walk-in closets, bedside shelves and lamps.
Hanse 348 sail area - 58.5 m2. The length of the hull is 10.4 m, the width is 3.5 m, the draft is 1.55 m. The volume of the fresh water tank is 230 l, the capacity of the fuel tank is 160 l. Engine power - 21 HP
Be the first to write a review