Elan GT5 is a Mediterranean cockpit yacht in production since 2018. For the production of the yacht's hull, a lightweight composite fiber is used, which allowed the shipyard's engineers to reduce the weight of the vessel without significant loss of strength characteristics. Seaworthiness class C - the yacht is supposed to operate at a distance of no more than 200 nautical miles from the coast.
A teak-covered folding bathing platform is provided in the aft hull. On the cockpit of the boat, in front of the entrance to the lower deck, there are two sofas on the sides of the hull. The steering post is located behind them. The upper deck is covered with teak and equipped with a self-draining system. At the request of the customer, instead of one guest cabin, a storage room is installed in the aft part. In addition, the aft bathroom is additionally equipped with a shower. Elan GT5 guest cabins are equipped with double beds, bedside storage and walk-in closets. On the midship side of the boat there is a saloon with two sofas installed opposite, on the sides and a table on the port side. Closer to the bow there is a galley equipped with a microwave oven, stove, sink and storage compartments. The master stateroom in the bow is equipped with its own bathroom, dressing room and double bed.
Elan GT5 sail area 44.6 m2. The volume of the fuel tank is 146 liters, the capacity of the fresh water tank is 220 liters, optionally, an additional tank of 490 liters is installed. The power of the engine designed to power the electrical systems of the vessel is 38 HP.
Be the first to write a review