• 2018 - 2024
  • 3 Cabin
  • 6 Bed
  • 4 Bathroom
Length
20,54 m / 67,39 ft
Beam
5,29 m / 17,36 ft
Draft
1,80 m / 5,91 ft
Displacement
46,50 tonne
Cruising speed
33,00 kn
Max speed
37,00 kn
Fuel
3 800 liters
Fresh water
710 liters

The Riva 66 Ribelle flybridge yacht with a length of 20.67 m and a hull width of 5.29 m was first presented at the Cannes Yachting Festival in 2018. The Ferretti Group was awarded the World Yachts Trophies for the best exterior design among 62-80-foot yachts.

The cruiser was developed by Officina Italiana Design in collaboration with the engineering department of the Ferretti Group based on two models of the Italian shipyard - 68 Ego and 68 Ego Super, and the silhouette of the yacht is similar to 76 Perseo. The ship's hull is made of fiberglass; stainless steel and mahogany are used in the exterior decoration.

Flybridge with an area of 25 m2 is equipped with sunbeds, two more outdoor recreation areas are located on the bow and stern of the main deck.

All three guest cabins on the lower deck have double beds and separate bathrooms. Aft is equipped with a cabin for one crew member, which can be accessed through the hatch in the main deck on the port side.

The galley is located amidships, at the rear of the cabin there is a seating area. On the bathing platform, you can store the tender, which descends into the water using a lift.

The Riva 66 Ribelle is equipped with two MAN V-12 engines with a total capacity of 3,100 hp, due to which the cruiser has a maximum speed of up to 37 knots and a cruising speed of 33 knots. Cruising range allows you to overcome up to 250 nautical miles. If desired, a gyroscopic pitching stabilizer can be installed on the yacht.

There are no reviews yet

Be the first to write a review

  • 2021
  • Length 20.45 m
  • Beam 5.30 m
  • Draft 1.56 m
$ 3 301 471
04:57 09.04.2022
  • 2019
  • Length 20.45 m
  • Beam 5.30 m
  • Draft 1.56 m
$ 2 831 358
01:02 10.04.2022

new from $ 3 098 468

If you are interested in the Riva 66 Ribelle, contact your broker or fill out the form:
    Loading...
    By submitting this form, you agree to our Privacy & Cookie Policy