The Rinker 360 EC is a hardtop pleasure motor yacht manufactured by the shipyard since 2013. The vessel with a fiberglass hull, having a length of 11.53 m, has a speed of up to 34 knots. Variants of deck finish, hull painting and the possibility of installing additional equipment are available to customers.
On the upper deck, in its bow there is a large sitting area with three deck hatches, portholes through which natural light enters the bow cabin. Immediately behind the recreation area is a cabin with glazing and a hardtop arch. On the starboard side there is a control panel with a steering wheel, captain's sofa and a sofa for the passenger on the port side. A semicircular sofa is installed right behind the steering seat. A table is set in front of him and together they form a dining area. The left console has a small galley with a sink, fridge and drawers. On the port side, along the aisle from the cockpit, you can get to the bathing platform with a locker for storing equipment, equipment and a retractable bathing ladder.
On the lower deck there is a salon with direct and semicircular sofas and a galley installed in it. All sofas are transformers and, if desired, additional beds are formed with their help. The kitchen is equipped with a sink, fridge, stove, oven and microwave. There is also a bathroom with a full shower. In the bow, the salon goes into a cabin with a double bed.
At the request of the buyer, the Rinker 360 EC is equipped with MerCruiser or Volvo Penta power plants with power from 300 to 380 hp. The fuel tank of the vessel is designed for 890 liters, which implies its operation within the coastal line at a distance of no more than 200 miles.
Be the first to write a review