• 2014 - 2020
  • 14 Passengers
  • 3 Cabin
  • 2 Bathroom
Length
17,42 m / 57,15 ft
Beam
4,86 m / 15,94 ft
Draft
1,30 m / 4,27 ft
Displacement
30,00 tonne
Cruising speed
25,00 kn
Max speed
31,00 kn
Fuel
2 500 liters
Fresh water
680 liters
Material
Fiberglass
Type
Planing
Sea class
A. Ocean Ships

The motor yacht Ferretti 550 has been produced by the Italian shipyard Ferretti since 2014. Her show took place at a boat show in Cannes in 2015. The design studio Zuccon International Project participated in the development.

Outdoor seating: cockpit, flybridge with sofa bed and dining area, bow with two sofas and a spacious sunpad. A galley bar is located between the lounge and the cockpit. Two control posts.

There is a system for launching a tender on the swimming platform. From there you get on board, in the submerged position, its steps fall below the waterline, which allows you to comfortably enter and exit the water.

In 2017, they carried out a restyling, retaining all the innovative elements: continuous glazing, three large windows with opening portholes in the case, unchanged interior layouts. The updated version improves visibility from the captain’s bridge and slightly increases the aft hydraulic platform. The life raft was hidden under the aft seat, and the captain's chair on the flybridge began to change the position of the back.

The layout of the lower deck includes three cabins and two or three bathrooms: a master across the entire width of the hull, a VIP in the bow, and a guest on the port side. An option is proposed for the Asia-Pacific region: instead of cabins there are areas for business meetings, the galley is transferred to the lower deck.

The yacht has two MAN 730 hp engines or 800 hp, which allow you to develop a cruising speed of 25 knots, the maximum - 30-31. There is a bow thruster, on request you can install a gyroscopic stabilizer pitching.

A flybridge gliding yacht is CE (A) certified and can withstand a storm of up to eight points and wave resistance of more than four meters in height.

There are no reviews yet

Be the first to write a review

Ferretti 550
Livorno, Italy
  • 2017
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 1 245 310
19:08 21.01.2020
  • 2005
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 485 671
10:22 31.01.2020
  • 2005
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 503 785
01:10 30.04.2020
  • 2005
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 424 538
04:53 16.06.2020
  • 2006
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 532 087
18:55 21.01.2020
  • 2005
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 452 840
12:33 09.05.2019
  • 2017
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 1 358 520
10:01 30.04.2020
  • 2006
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 475 482
04:47 21.11.2019
  • 2017
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 5 505
per day
01:52 10.06.2020
  • 2005
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 475 482
10:07 14.05.2020
  • 2005
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 435 859
07:06 17.06.2020
  • 2019
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 1 471 730
17:15 08.05.2019
  • 2006
  • Length 17.42 m
  • Beam 4.86 m
  • Draft 1.30 m
$ 475 482
21:50 20.01.2020

new from $ 1 375 502

If you are interested in the Ferretti 550, contact your broker or fill out the form:
    By submitting this form, you agree to our Privacy & Cookie Policy